Part Number Hot Search : 
EM483 SK055M C128C 66026 AT220 BA9S12 R1601 167BZI
Product Description
Full Text Search
 

To Download GQ2123 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 www..com
ISSUED DATE :2004/12/16 REVISED DATE :
GQ2123
Description
C M O S P o s i t i v e Vo l t a g e R e g u l a t o r
The GQ2123 series of positive, linear regulators feature low quiescent current (30 A typ.) with low dropout voltage, making them ideal for battery applications. These rugged devices have both Thermal Shutdown, and Current Fold-back to prevent device failure under the "Worst" of operating conditions. In applications requiring a low noise, regulated supply, place a 1000pF capacitor between Bypass and Ground. The GQ2123 is stable with an output capacitance of 2.2 F or greater.
Features & Low Dropout Voltage Very
Functional Block Diagram
Applications & Battery Powered Widgets
&Instrumentation &Wireless Devices &PC Peripherals &Portable Electronics &Cordless Phones &Electronic Scales
&Guaranteed 300mA output &Over-Temperature Shutdown &Current Limiting &Short Circuit Current Fold-back &Highly Accurate 1.5% &Noise Reduction Bypass Capacitor &Power-saving Shutdown Mode &Factor Pre-set Output Voltage
Package Dimensions
REF. A B C D E F
Millimeter Min. Max. 2.70 3.10 2.60 3.00 1.40 1.80 0.30 0.55 0 0.10 0 10
REF. G H I J K L
Dimensions Millimeter 1.90 REF. 1.20 REF. 0.12 REF. 0.37 REF. 0.60 REF. 0.95 REF.
Typical Application Circuit
1/7
ISSUED DATE :2004/12/16 REVISED DATE :
Absolute Maximum Ratings
Parameter
Input Max Voltage Output Current Output Voltage Operating Ambient Temperature Junction Temperature Maximum Junction Temperature Power Dissipation( T=100 : ) EDS Classification
Symbol
VIN IOUT VOUT Topr Tj Tj Max PD
Ratings
8 PD/( VIN- VO) 1.5~5.0 -40 ~ +85 -40 ~ +125 150 380 B
Unit
V mA V :
mW
Electrical Characteristics Ta=25
Parameter Output Voltage Output Current Current Limit Load Regulation Dropout Voltage Quiescent Current Ground Pin Current Line Regulation Symbol VOUT(E)
(Note1)
unless otherwise noted
Condition
VIN=VOUT(T)+2V, IO=1mA VIN=VOUT(T)+2V, IO=300mA
Min
-1.5% -2.5% 300 300 -1 1.4V
TYP
VOUT(T)
(Note2)
Max
1.5% 2.5% 1 1300 400 300 50 0.2 0.15 0.1 0.4 7 300 VIN 0.4 0.1 0.5 1 0.4
Unit
V V mA mA % mV A A
IO ILIM REGLOAD VDROPOUT IQ IGND REGLINE
VIN=VOUT(T)+2V, VOUT VOUT(E)*0.96 VIN=VOUT(T)+2V, VO>1.2V VIN=VOUT(T)+2V, IO=1mA to 300mA 1.2V VOUT(T) 2.0V IO=300mA VO=VOUT(E)-2% 2.0V450 0.2 30 35 0.02 0.2 150 30 30 150 60 50 20 30 0.5 -
-0.2 IO=1mA 1.4V%
Input Voltage
Over Temperature Shutdown Over Temperature Hysterisis
VIN OTS OTH TC ISC PSRR eN VEH VEL IEH IEL ISD VO,SD
V : : ppm/ : mA dB Vrms V V A A A V
Output Voltage Temperature Coefficient Short Circuit Current(Note4) Power Supply Rejection Output Voltage Noise EN Input Threshold EN Input Bias Current Shutdown Supply Current Shutdown Output Voltage
certain IOUT value).
f=10kHz f=10Hz~100kHz Co=2.2 F Io=10mA VIN=2.7V to 7V VIN=2.7V to 7V VEN=VIN, VIN=2.7V to 7V VEN= 0V, VIN=2.7V to 7V VIN=5V, VO=0V, VENNote 1: VOUT (E) =Effective Output Voltage (i.e. the output voltage when "VOUT (T) + 2.0V" is provided at the VIN pin while maintaining a 2: VOUT (T) =Specified Output Voltage 3: VIN (MIN) =VOUT+VDROPOUT 4: To prevent the Short Circuit Current protection feature from being prematurely activated, the input voltage must be applied before a current source load is applied.
2/7
ISSUED DATE :2004/12/16 REVISED DATE :
Ordering Information ( contd. )
Part Number GQ2123-15 GQ2123-25 GQ2123-28 GQ2123-30 GQ2123-33 GQ2123-35 GQ2123-37 GQ2123-50
XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
Marking 3B152 3B252 3B282
Output Voltage 1.5V 2.5V 2.8V 3.0V 3.3V 3.5V 3.7V 5.0V
Part Number GQ2123-18 GQ2123-27 GQ2123-29 GQ2123-31 GQ2123-34 GQ2123-36 GQ2123-38 GQ2123-2H
XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX
Marking 3B182
Output Voltage 1.8V 2.7V 2.9V 3.1V 3.4V 3.6V 3.8V 2.85V
3B272 3B292 3B312 3B342 3B362 3B382 3B2H2
3B302 3B332 3B352 3B372
3B502
Characteristics Curve
3/7
ISSUED DATE :2004/12/16 REVISED DATE :
4/7
ISSUED DATE :2004/12/16 REVISED DATE :
5/7
ISSUED DATE :2004/12/16 REVISED DATE :
6/7
ISSUED DATE :2004/12/16 REVISED DATE :
The GQ2123 series of COMS regulators contain a PMOS pass transistor, voltage reference, error amplifier, over-current protection, and thermal shutdown. The P-channel pass transistor receives data from the error amplifier, over-current shutdown, and thermal protection circuits. During normal operation, the error amplifier compares the output voltage to a precision reference. Over-current and Thermal shutdown circuits become active when the junction temperature exceeds 150 : , or the current exceeds 300mA. During thermal shutdown, the output voltage remains low. Normal operation is restored when the junction temperature drops below 120 : . The GQ2123 switches from voltage mode to current mode when the load exceeds the rated output current. This prevents over-stress. The GQ2123 also incorporates current fold-back to reduce power dissipation when the output is short circuited. This feature becomes active when the output drops below 0.8 volts, and reduces the current flow by 65%. Full current is restored when the voltage exceeds 0.8 volts. The GQ2123 is stable with an output capacitance to ground of 2.2 F or greater. Ceramic capacitors have the lowest ESR, and will offer the best AC performance. Conversely, Aluminum Electrolytic capacitors exhibit the highest ESR, resulting in the poorest AC response. Unfortunately, large value ceramic capacitors are comparatively expensive. One option is to parallel a 0.1 F ceramic capacitor with a 10 F Aluminum Electrolytic. The benefit is low ESR, high capacitance, and low overall cost. A second capacitor is recommended between the input and ground to stabilize Vin. The input capacitor should be at least 0.1 F to have a beneficial effect. A third capacitor can be connected between the BY-PASS pin and GND. This capacitor can be a low cost Polyester Film variety between the value of 0.001~0.01 F. A large capacitor improves the AC ripple rejection, but also makes the output come up slowly. This "Soft" turn-on is desirable in some applications to limit turn-on surges. All capacitors should be placed in close proximity to the pins. A "Quiet" ground termination is desirable. This can be achieved with a "Star" connection. The Enable pin normally floats high. When actively, pulled low, the PMOS pass transistor shuts off, and all internal circuits are powered down. In this state, the quiescent current is less than 1 A. This pin behaves much like an electronic switch.
Detailed Description
External Capacitors
Enable
Important Notice: All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of GTM. GTM reserves the right to make changes to its products without notice. GTM semiconductor products are not warranted to be suitable for use in life-support Applications, or systems. GTM assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. Head Office And Factory: Taiwan: No. 17-1 Tatung Rd. Fu Kou Hsin-Chu Industrial Park, Hsin-Chu, Taiwan, R. O. C. TEL : 886-3-597-7061 FAX : 886-3-597-9220, 597-0785 China: (201203) No.255, Jang-Jiang Tsai-Lueng RD. , Pu-Dung-Hsin District, Shang-Hai City, China TEL : 86-21-5895-7671 ~ 4 FAX : 86-21-38950165
7/7


▲Up To Search▲   

 
Price & Availability of GQ2123

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X